Cover the surrounding area with masking tape. Pre-treat the area with MoTip Primer to ensure perfect adhesion for the subsequent paintwork. Apply the primer in several thin layers. Once the layers have hardened, sand them down with presto P1000 wet sandpaper. Once again, clean the undercoat with MoTip Degreaser.
Now the lacquer with the corresponding colour from the MoTip Kompakt system can be applied in several thin layers. In order to make sure it blends in to the original paintwork, mist it within the covered area. Once the metal-effect lacquer has dried for 30 minute, it must be sealed with 2-Coat Clear Lacquer. Otherwise the aluminium particles in the metallic lacquer will be damaged by environmental and weather conditions.